Wind Power Generator

https://korean-electronics.com//inquiry[INQ. NO. 1709E07] Production of wind power generator by GL Co., Ltd. costs only 2/3 compared with existing wind power generators. Solar panels are installed on the top of the generators for utilization of solar heat at the same time.
As for installation, you would need to dig at least a couple of meters for wind power generators fin the household. However, the company’s product requires no digging at all for installation, as it has a rectangular frame.
Also, you can install only one with existing generators. But with its products, you can pile them up in a big rectangular shape by placing them beside each other or stack them on top of one another up to hundreds.
Existing generators have very low wind utilization rate. However, as you can install up to 12 blades with its generators, the wind utilization rate is very high. Also, the existing generators create a lot of noise whereas vibration and noise have significantly decreased for its products. Finally, the company’s products are completely selfassembled, so they are not prone to breakdown and it is easy to fix them when they malfunction.

korean-electronics.com | Blog Magazine of korean electronics, brands and Goods

Automatic Processor for Auto-Tooth Bone Graft Material

https://korean-electronics.com//inquiryKorea Dental Solution specializes in automatic auto tooth bone graft material, and its main objective is to provide total dental solutions to customers. Korea Dental Solution has been extensively focusing on the ATB-Facility system, which is the only patented technology. In addition to its flagship “BonMaker,” it is the first fully automated AutoTooth bone graft material producing device from a patient’s own teeth based on its own technology.
BonMaker is an in-house advanced system for processing a patient’s own extracted teeth into ‘Auto-Teeth bone’ graft material. A bone graft particulate that is created from the patient’s own body, is generally considered the gold standard in dental biologics. However, the processing of an autograft usually requires a more complicated surgical procedure with pain and a longer healing period.
The BonMaker solves the usual problems encountered with autografts. With the BonMaker auto-teeth bone graft particulate processing, dentists can manufacture bone graft material specific to the patient by using the patient’s own extracted teeth. The BonMaker takes the prepared patient’s crushed tooth fragments and processes them into bone graft particulate in just over 19 min 50 sec.


The consumables required are three tiny, color-coded bottles of BonReagent which come at a fraction of the cost of other bone graft materials. Furthermore, with a processing time of just over 19 min 50 sec for powder type and 35 min 50 sec for block type, the particulate and block can be manufactured in a dental clinic or hospital. A single processing cycle can yield up to 3cc of bone graft material and it delivers the best clinical and economic results compared to any other bone graft materials. This device has acquired medical CE and ISO13485 certifications.

Developing and Supplying Various Kinds of New Products

From Korea Dental Solution’s initial establishment, to develop various products that meet the full demands of its customers and more importantly to their satisfaction, is its greatest priority. And also Korea Dental Solution has been developing and supplying various kinds of new products to meet its customers’ needs.

 

korean-electronics.com | Blog Magazine of korean electronics, brands and Goods

Floor Heating Systems

https://korean-electronics.com//inquiryENERPIA’s heating X-L pipe, an innovative heating technology, improves heating efficiency using special heat medium and expansion pressure by heating the heating wire in a closed X-L pipe without a boiler or circulating motor, which is the medium for floor heating. It saves more than 70% of heating costs compared to oil-fueled heating of the same area. Long time heating is possible with small energy by the heat storing action of the heat medium and plaster layer filled in the pipe.
With the adoption of an expansion pressure absorbing device inside the pipe, it prevents the bursting of the X-L pipe and leakage of liquid, and with the application of natural material that prevents heat storage and freezing, freezing and bursting is prevented down to -20°C.
Underfloor heating cable is a system that buries floor heating cable in the floor of the building, using radiation from electric energy to conduct main heating and supplementary heating in the floor in order to make the indoor environment clean and provide convenient heating effects. It adopts a special heat generation conductor considering resistance value per unit length, and it has excellent heating effect. It is advantageous for space utilization with no need for a boiler room, while it does not require oil supply, and does not generate exhaust. It does not require a separate maintenance facility or cost, and central and partial heating are possible.
Heating film is a cutting-edge heating method based on gravure printing of carbon heating element on PET film, while the electrodes are made of copper foil, and laminated with a film. Film heating is well-being heating that emits far-infrared rays and anions, producing warm air using far-infrared radiation. With its high heating efficiency, it can save 50% or more heating cost compared to an oil boiler heating the same area. One-day construction and use on the same day is possible, so it can greatly save on construction costs. Gravure rotation printing method is adopted, and nanoparticle (1 micron or less) carbon paste is used to increase safety and lifespan of the product.

 

Exporting to more than 20 countries

Since its founding in 2003, ENERPIA has been providing solutions for floor heating systems and snowremoval systems, and all other areas that require heating as a one-stop solution from R&D to production & construction, striving to allow people to live warm and healthy lives.
As part of its efforts to advance into overseas markets, ENERPIA opened a local corporation in China and a branch office in Russia. As of 2016, ENERPIA is exporting floor heating systems and various kinds of solutions to more than 20 countries around the world.

korean-electronics.com | Blog Magazine of korean electronics, brands and Goods

Far-infrared Radiator

https://korean-electronics.com//inquirySince its establishment in 1999, Myungshin Medical Co., Ltd. has produced and sold dome-shaped far-infrared radiation beauty therapy heaters, which are both convenient and efficient in improving cold constitution, detox and weight loss and relief of joint pain, applying its patented technology of surface heating elements. It has obtained KFDA certification in Korea, FDA and CE certifications from Europe, TFDA certification from Taiwan and CCC certifications from China. Currently, the company exports to Belgium, Sweden, USA, Hong Kong, Australia and Taiwan.
Myungshin Medical is the best company in its field in Korea based on the accounting records of 2014 – with sales exceeding one hundred million won. The company is the only one to finish clinical trials for obesity treatment and has been registered by the FDA in 2012. Currently, it is in the process of obtaining MOH approval from the UAE while working to export to China. Myungshin Medical will strive for continuous product development by strengthening convenience, technology, and efficiency. Eventually, it wants to advance as an innovative global company as Korea’s proud medical leader that prioritizes the health of its customers.

VADIVA Slide – Far-infrared Radiator

VADIVA Slide is an item that can assist both health and beauty thanks to its fat-reduction effects, blood-circulation improvement effects and pain-relieving effects. It is free from radiation danger by using a carbon-based heating element. It can be effective for accident sequela, stomach pain, joint pain, neuralgia and other senile diseases. This device will eventually substitute drugs or lower your dependence on them.
VADIVA Slide covers the whole body in a form of slide so the volume can be reduced with its 2 gear sliced forms. Its logistical cost can be also minimalized for the same reason. However, it can be used freely for plus-sized people as the dome’s interior is large enough. Its application includes hospital, skin care shop and household.


ZenBeam is another far-infrared radiator, which is easy to use and classy with two-tone design. Its main application is for the abdomen, but it can be used for various other areas where applicable to relieve pain and accelerate blood circulation.

korean-electronics.com | Blog Magazine of korean electronics, brands and Goods

WIMI 14 Inch Pedestal Standing Fan

https://korean-electronics.com//inquirySince its establishment in 1994, Myung Sung Inc. has been specializing in manufacturing and distributing wireless household electric appliances, auxiliary batteries,and silicon-made products. It also has been importing and exporting corporate promotion materials at retail and wholesale. It leads the market based on reasonable prices through producing and distributing goods both at home and abroad by offering top-quality products and providing after-sales services.

 

“WIMI Wireless 14” Pedestal Fan

WIMI Silence 14 inch pedestal fans are wireless with auxiliary battery that can be used indoors or outdoors without a cable. Their built-in 15,600mAh batteries aredetachable and can be used as a power bank, depending on their application. Wireless remote control allows remote controlling within 7

meters. The remote control allows oscillating, timer, LED indicator, air volume and on/off function. And by using the Nidec BLDC motor from a Japanese motor company, batteries last longer than other existing batteries. These pedestal fans are relatively quiet with their noise level less than 50dB, even if the fans are used at their highest speed. They can operate up to 35 hours in non-oscillating mode and 15 hours in oscillating mode.


The speed can be adjusted in six steps. Silent gear (step 1-2) is preferred by sensitive people as it is silent. Sleep gear (step 3) is for pregnant women, children and elderly people when they sleep.
Natural gear (step 4) is suitable for daily activities and crowded indoor offices. Lastly, cold wind gear (step 5-6) creates cool wind. Other advantages include their automatic switch-off after 12 hours and adjustable height. The inclination angle can also be adjustable.

korean-electronics.com | Blog Magazine of korean electronics, brands and Goods

Surge Protective Devices

https://korean-electronics.com//inquiryKoenone provides total solutions such as manufacturing surge protective devices and analysis of damage caused by electrical surge as a specialist in lightning strikes. It supplies surge protective devices for high-quality power, signal, telecom, coaxial and LAN lines that are equipped with large capacity, multifunctional and complete protection performance. It also manufactures autorecovery circuit breakers and smart electricity supply systems.
Based on its exclusive expertise and technology, the company supplies high-quality surge protectors that provide complete protection, strict safety and surge information, thereby promoting system stability and efficient facility management for clients’ key equipment. The company is fully equipped to solve any problems originating from lightning strikes and electrical disturbances, and continuously strives to improve quality and service to clients’ satisfaction.

 

High-Performance and Multi-functional Surge Protectors

Koenone’s power line surge protective devices are CE certified products according to IEC 61643-11 standard. They perform complete protection function with their most optimal design. The company provides various types such as 3-Phase 4-Wire; 3-Phase 3-Wire; Single Phase 2-Wire; Serial and Parallel. These protectors come with line voltage measurement and display, and backlight LCD type surge counter (Non-volatile Memory type). They are also equipped with diagnosis module for leakage current, surge information history management and RS485 communication module. Lastly, their aluminum cases have proven safety against surge protector failure. Their applications include instrument power such as fl ow meter, water gauge and electronic scale, actuator power and other singular device power.
Signal/Telecom surge protective devices are also CEcertified products based on IEC 616432-21. They perform complete protective function with the most optimized quadruple hybrid design. They come in various types, such as 2-wire, 4-wire, DC 5V, 12V, 24V, 48V and 185V for analog signal, telecom, data signal, digital signal, LAN and video signal. They are equipped with reverse surge protection and surge counter. They have completed tests for 20kV and 10kA (Up 150V or below) in accordance with IEC 61643-21. Their applications include 4-20mA analog signal line, RS485, Fnet telecom line, load cell, data line, ADSL modem and PC LAN.

korean-electronics.com | Blog Magazine of korean electronics, brands and Goods

Surgical and Medical Devices

https://korean-electronics.com//inquiryH&Surgical is one of the fastest growing manufacturers of surgical and medical devices. H&Surgical has specialized in R&D to provide improved techniques and quality of leading surgical product lines available at competitive prices.
The company’s flagship products are three types of TROCAR for each Laparoscopic, Thoracoscopic and Arthroscopic usages, Polymer clip and Titanium clip with automatic (disposable) or manual type and applier for each open and endo ligation system.
R5 TROCAR is a single-use trocar system for laparoscopic surgery, making surgical instruments and cameras to penetrate.
H&Surgical’s R5 TROCAR is made with the company’s own design and technology. Moreover, it is a product that collects the merits of large companies’ products and has gained many good responses from domestic market and overseas market.
HANS T AIT AN is disposable titanium clip ligation system, used for vessel ligation during surgery. H&Surgical’s titanium clips have good ligation strength and minimize the slipping. Also, there are six different sizes to provide safety and convenience. It can be used in open and endoscopic surgery.
HANS CLIP is a disposable polymer ligation system, used for vessel ligation during surgery. H&Surgical’s clip is the first localized product in South Korea. It also boasts the same quality as Hem-o- Iok. It can be used for open surgery and endoscopic surgery. Four sizes of HANS CLIP are available for ligation of various sizes of vessels. Currently, the company is exporting its clips to markets in Asia, Europe and Latin America.
HANS T AIT AN is a disposable titanium clip ligation system, used for vessel ligation during surgery. H&Surgical’s titanium clips have good ligation strength and minimize slipping. Also, there are six different sizes to provide safety and convenience. It can be used in open and endoscopic surgery.

Toward Becoming a Total Solution Supplier of Surgical Devices

H&Surgical was established in 2012 aiming to be a total solution supplier of surgical devices based on the world’s best technology beyond South Korea. The company’s CEO explains, “We are growing rapidly based on specialized research and development and advanced product lines in the medical device field for the quickly changing global surgery operations. We aim to be a frontrunner of the next generation by producing the best products for global customers, the best environment for global employees and families, and optimal sharing for worldwide investors and partners.”

korean-electronics.com | Blog Magazine of korean electronics, brands and Goods

Total Printing Solutions

https://korean-electronics.com//inquiryJ. Stephen Lab. is the first company to have developed a dot impact printer mechanism for receipt printing in Korea under its representative brand, Sewoo. Since its establishment in April 2002, the company has been recognized for having developed printers for receipt printing for the first time in Korea, and for the superior quality of its mini printers worldwide in 60 countries.
With continuous R&D investment in the field of mini printers, the company has been able to produce mechanisms for dot impact printers for POS, thermal printers and credit card readers. Moreover, in response to fast-changing market demands, it has developed an interface card, accessories and various printers such as label printers for distribution and parcel services, mobile printers of various sizes and even desktop RFID printers.

Direct Thermal Receipt Printer, Mobile Printer and Label Printer

SLK-TS400 is a direct thermal receipt printer with jam-free design. It can be installed on any wall and its components are easily replaceable without any tools. It prints at high speed, around 220mm per second. The size is compact with 130(W), 140(D) and 154(H) mm. It is compatible with ESC/POS commands as well. It is qualified for power efficiency as Energy Star and top and front exit are available.
LK-P22/P22MI is a receipt printer with durability emphasized in its structural design. Various Bluetooth connections, NFC function pairing and multi-connection are available. More specifically, standard interface USB and optional Bluetooth 4.2 or Wi-Fi(802.11 a/b/g) are available. It is the fastest printer within its class with a highest speed of 100mm per second. Moreover, it is very light, weighing only 242.5 grams with its battery.


LK-B425 is a direct thermal compact desktop label printer. Its compact size maximizes space utilization. It is flexible in handling various types of media, such as thermal fanfold label and thermal roll label. With jog dial, users can adjust printing density without access to a computer.
LK-B24 is a thermal transfer / direct thermal compact desktop label printer. Its compact size maximizes space utilization as well. In fact, it has the lowest height in its class. It has a vertical directional interface with rapid graphic printing speed at 127mm per second. Lastly, it is easy to replace paper and ribbons.

korean-electronics.com | Blog Magazine of korean electronics, brands and Goods

Ultrasonic Surgical Instruments & Ultrasonic Application Medical Instruments

https://korean-electronics.com//inquiryLHbiomed was founded in 2014 by three experienced medical field engineers. Based on their know-how of ultrasonic technology, the company has been developing, manufacturing and selling ultrasonic surgical instruments as well as ultrasonic application medical instruments. It intends to become a leading company in this field by realizing customer value and improving medical services.

 

Liposaver LS-2000

Liposaver uses state-of-the-art ultrasound technology designed to gently reshape a person’s body. This innovative Liposaver technology breaks up fat selectively, while preserving other structures like blood vessels, nerves and connective tissue, thereby reducing pain, bleeding, sagging skin and irregular contouring that may occur with traditional liposuction.
Liposaver can be used for removal of large amounts of fat as well as for “spot reduction” of troublesome areas, and is also used for high-definition body sculpting such as creating a “six-pack” abdomen. Almost any area of the body can be treated such as tummy, love handles, waist, arms, back, hips, butt ocks, thighs as well as chin and face. Liposaver can even be safely used in areas where traditional liposuction is risky, like the face and neck, to reduce double chin and treat fatty calves.
LS-2000 is an ultrasonic surgical unit which uses ultrasound frequency vibration to fragment emulsified subcutaneous fatty tissues. The PZT ceramic crystals in the hand-piece of LS-2000 transforms electrical signal into ultrasonic vibrations, and these vibrations are transmitted to the probe of LS-2000 which performs the function of fragmenting and emulsifying the subcutaneous fatty tissues.
LS-2000 can adjust operating features such as vibration amplitude and frequency, and provide two operation modes, N mode (continuous mode) and Z mode (pulsed mode). LS-2000 is intended for fragmentation and emulsification of subcutaneous fatty tissues for aesthetic body contouring by using ultrasound cavitation effect. LS-2000 is indicated for use in the following surgical specialists when fragmentation and aspiration of soft tissue are desired: plastic and reconstruction surgery.
Its applications include areas such as the abdomen, thighs, arms, double chin, six pack, gynecomastia, etc. It is composed of a main body, a hand-piece, probes (D1.9mm/ D2.9mm/ D3.7mm/ D4.0mm(optional), foot switch, spanner and power cord.

korean-electronics.com | Blog Magazine of korean electronics, brands and Goods

Medical Solutions

https://korean-electronics.com//inquiryDaon Medical is a company that manufactures and distributes medical equipment as well as cosmetics. It provides PDO lifting thread, filler and Botox to the medical equipment field, and stem cell culture fluid ampoules and natural cosmetics in the cosmetic field.
Currently, the company has registered with KOTRA for branch businesses in Hungary, Ukraine and Poland. It has already participated in many overseas expositions in countries such as Iran, Kazakhstan, Dubai and China. It has also participated in export consultations in Turkey, Oman, Russia, Uzbekistan, Kazakhstan, Poland and China.
Thread-lifting is a new and innovative technique to rejuvenate the face and other parts of the body, with the benefit of non-surgical intervention. It thus requires only a short period of recuperation. The material consists of biodegradable threads that have long been used in surgery.
During this procedure, threads are inserted into the deeper connective tissues. They attach themselves to the subcutaneous tissue and, if positioned properly, they create tension in the desired direction. This creates a mild stretching of the subcutaneous tissue and skin. This process is supported by an increase of collagen building up around the thread. Finally, collagen provides natural firmness and elasticity of the skin, creating the desired lifting effect.

 

Magic PDO Thread, Flore HA Filler & Stem Cell Ampoule

PDO thread functions as collagen is produced in response to the presence of a foreign body (thread) and mechanical injury (by needle) stimulates blood fl ow and increases the metabolism in the treated area. It is easy, effective without downtime, and long-lasting (more than two years). Effects include lifting, skin rejuvenation, wrinkle removal and reduction of cellulite.


Benefits of Flore HA filler include neocollagenesis, nano-sized colloid, smooth injection and any layer injection. In other words, it lasts long (1-2 years) and with better efficacy. Injection is done through a 31G needle, creating no lumps and requiring no massage. Simply, the injection and molding (shaping) are smooth. Any layer could be injected through intradermal injection to create neocollagenesis.
Moreover, stem cell ampoules are now being delivered to about 50 hospitals in Korea. Compared with products of other companies, skin rejuvenation effects are more rapid, which has been proven through clinical tests. By undergoing around 70 tests conducted by Seoul National University Hospital, the company has been able to cultivate the most optimal stem cells for safety.

korean-electronics.com | Blog Magazine of korean electronics, brands and Goods