Another Speed Battle for ‘Securing the 5G Technology’ in the Wired Communications Equipment Industry

July 4, 2018 by Leave a Comment

https://korean-electronics.com//inquiryWired communications equipment makers have begun to secure fifth-generation (5G) communications technology. It is a strategy to prepare for advancement of the wired network which will support mobile communications infrastructure such as base stations, etc. It is
expected that they will start tests such as interworking with communications companies as early as the latter half of this year.
Dasan Networks and Ubiquoss Inc. will accelerate the development of 5G wired communications equipment. Dasan Networks plans to commercialize its TSN (Time Sensitive Network) technology. TSN realizes ultra-low latency communications, a core service of 5G, by enhancing the accuracy of packet transmission time. They plan to mount the virtual network functions (VNF) on the switch and router equipment for realizing ultra-high- speed data transmission and 5G service.
Ubiquoss Inc. responds to the 5G communications market by enhancement of its software defined network (SDN) technology, which maximized the network operation efficiency by separating software and hardware. It also started developing the access network backhaul equipment that supports the 5G communications to the subscriber unit.
Considering the characteristics of communications equipment, which is essential for interworking with the communications network, they carry forward equipment development cooperation and network interworking test with mobile communications companies. It is expected that verification of equipment compatibility and performance will begin in earnest from the second half of the year when communications companies will start to invest in 5G communications facilities. As communications equipment is not completed simply with a product development but it has to be linked with communications network to guarantee performance, commercialization of wired communications equipment is expected to be completed in line with facilities investment time of communications companies. As the time for investing in 5G communications equipment is imminent, technological development of wired communications equipment makers is expected to accelerate.
Successive 5G technology developments of wired communications equipment makers should be preceded by advancement of infrastructure for 5G communications at the wired network stage. Construction of 5G communications facilities is concentrated on wireless communications equipment such as base stations and repeaters. However, unless supported by a wired network, 5G services such as ultra-high-speed and ultra-low latency are virtually impossible. This means that it is essential to replace and upgrade the wired network equipment to process large amounts of data quickly.
The differentiation strategy from foreignequipment makers that started the advanced development of 5G wired communications equipment is a problem waiting to be solved. Foreign equipment makers such as Cisco, Nokia, and Huawei have secured a portfolio of 5G wired communications equipment and solutions for several years. As foreign equipment makers have made a massive investment in R&D and manpower, it is generally accepted that their equipment performance is more advanced. Price competition with Chinese telecom equipment makers such as Huawei is inevitable.
An official in the communications equipment industry explains, “Domestic wired communications equipment makers should find ways to survive between the technological prowess of Cisco and Nokia and the price competitiveness of Huawei. They should find ways to differentiate themselves, such as development of 5G equipment optimized for the domestic communications infrastructure market, etc.”

korean-electronics.com | Blog Magazine of korean electronics, brands and Goods

Filed Under: Industry trends Tagged With: , ,

Vibration Motors& Rectangular Linear Vibration Motor

July 4, 2018 by Leave a Comment

https://korean-electronics.com//inquiry[INQ. NO. 1806E31] The vibration motor of YOUNG JIN HI-TECH is widely adopted in small devices requiring long-time vibration, such as smartphones, wearable devices, game machines, medical equipment, toys, etc. In order to enhance competitiveness of the vibration motor, the company applied the structural new technology at the development stage, securing price competitiveness by simplifying the manufacturing process, and retaining uniform quality by applying process automation.
Linear Vibration Motor generates resonant vibration by stimulation of the electromagnet force with the natural frequency of the moving assembly including weight (vibration by moving the spring within the elastic range). The electromagnetic force is formed by direct winding on the yoke, and the magnetic stop function speeds up the response and solves small vibrations.
The Brushless DC Vibration Motor adopts the method driven not by mechanical switching but by electric switching using IC (Integrated Circuit, a kind of semiconductor device). It can be used permanently and maintenance is easy. Precise speed control by the PWM method is also possible. Both electrical and mechanical noise can be minimized. It has a miniaturized structure.
The Rectangular Linear Vibration Motor is a vibration motor that has improved the vibration sensation by installing a weight inside and then vibrating it left and right. The electromagnetic force of symmetrical structure is formed. The fast-response characteristic is implemented through the relative magnetic structure. The square structure of the product is easy to handle and minimizes vibration noise.
Established in 1997, YOUNG JIN HI-TECH, has been maintaining its integrity and challenging spirit for 21 years as a local SME based on the corporate philosophy of “Do it right now,” “Be sure to do it,” and “Do it until you achieve.” We produce advanced automation equipment requiring cutting edge technological prowess, such as smartphone, semiconductor, LCD, etc., and have been striving to create added value of the local community. In addition, we export the automation facilities to China, Vietnam, etc.


In particular, YOUNG JIN HI-TECH has accumulated know-how through ceaseless research and development centered on the institute of technology and, as a result, developed and registered a patent for a small vibration motor. Based on this, YOUNG JIN HI-TECH succeeded in commercialization and mass-produced the products in Vietnam, exporting them to Japan, China, etc. YOUNG JIN HI-TECH started the small motor business in 2010, received a presidential citation on Trade Day in 2013, was appointed as a “global hidden champion,” and as an excellent creative and innovative enterprise, received the Industrial Technology Award from the Minister of Trade, Industry and Energy, and was appointed as the Korean Master Technician in 2014, and was appointed as the enterprise of the month in 2015, thereby proving its technology and credibility.

korean-electronics.com | Blog Magazine of korean electronics, brands and Goods

Filed Under: Special Report Tagged With: , , , , , , , , ,

DC Power Supply Components Related to Lithium Ion Secondary Battery

July 4, 2018 by Leave a Comment

https://korean-electronics.com//inquiry

REP (Register Embedded Protector) of the lithium ion battery

[INQ. NO. 1806E30] The battery REP is a fuse-type ceramic chip component that is equipped as the second protector to make up for the first PCM of the lithium ion battery applied to the wireless electronic equipment. In the event that it has a problem, it protects the battery and equipment by sensing the overvoltage or overcurrent and then disconnects the power physically, thereby preventing accidents caused by the battery for wireless electronic equipment. At present, it is expected that application of the battery REP will be expanded into all areas of life, such as the smartphone followed by Bluetooth speaker, wireless vacuum cleaner, robotic vacuum cleaner, E-bike, etc.
For this, RN2 Technologies completed the development of 18 kinds of products applicable to notebook PC, tablet PC, mobile, home appliances, etc., acquired Certifications of UL and TUV and have undertaken full-scale mass production, along with expansion of the second factory.

 

DC-DC Converter for E-bike (stepdown DC-DC converter)

DC-DC converter is a product that is applied to mobile devices using a battery and its function is to convert the constant battery voltage to the voltage fitting for the internal components having different rated voltage and distributing it. In line with the global trend of high efficiency and miniaturization, this product is in module form, having integrated the high-performance compound semiconductor three-dimensionally on the LTCC multi-layer ceramic PCB (MCP) and it is developing the converter in collaboration with the Electronics and Telecommunications Research Institute (ETRI) aiming at 94% of the power conversion efficiency that can output 12 volts for electronic devices and 5 volts for smartphones simultaneously out of the battery input power of 36~48 volts.
RN2 Technologies, a KOSDAQ-listed company established in 2002 and specializing in components and materials, owns unrivaled low temperature co-fired ceramic (LTCC) materials high-frequency circuit design and precision multi-layered ceramic process technology that can treat the whole process ranging from raw material of the ceramic products to the final products. Based on such technological prowess, RN2 Technologies manufactures LTCC powder and the MCP for threedimensional high-integration packaging, and it produces and sells the related products.
RN2 Technologies has achieved compound annual growth rate (CAGR) of 20.8% over the past 11 years and expanded its production facilities by additionally building the second factory to concentrate on production of REP (Resister Embedded Protector, which is a battery protection element) and multilayer ceramic printed circuit boards (MCP).

RN2 Technologies is the world’s only holder of the original technology concerning glass-free LTCC (low-temperature co-fired ceramic) materials. Based on such technology, we produces the multilayer ceramic chip components such as coupler and Termination, etc. for power amplifiers (PA) and low-noise power amplifiers (LNA) of the mobile communication base stations and repeaters. In addition, the company develops and produces the following components and modules that are the DC power supply components related to the lithium ion second battery applied to e-mobility as the next-generation flagshi item.
korean-electronics.com | Blog Magazine of korean electronics, brands and Goods

Filed Under: Special Report Tagged With: , ,

All-in-One Filmmaker(Everstick)

July 4, 2018 by Leave a Comment

https://korean-electronics.com//inquiry

A New Era, and Changing Needs

[INQ. NO. 1806E23] The emergence of numerous video streaming platforms, and the simultaneous growth of the MCN industry is a clear film entertainment trend in the current generation. This, in line with the proliferation of cameras, specifically smartphone cameras, sparked changes in the needs of customers. In fact, the smartphone has positioned itself as a power within the photography market, as it currently comprises 98.6% of the global digital camera market. How exactly did the needs of customers change? The emergence of one-person creators, the surge of numerous “amateurs,” represents, in itself, a change in consumer needs. More and more “film people” will demand gear to support smartphone cameras.
David Ko, the founder of Infinite Neoism, realized that the currently available filming gadgets were “unsuitable” for consumers’ changing needs, as they were too complex and costly, and thus came up with the concept of the Everstick.
The initial idea arose in the year 2015. As an amateur filmmaker participating in various film contests, Ko had always felt discontent with the gadgets he had in hand. He had always believed in the capabilities of the smartphone camera, which led to his endeavor to develop “better” gadgets. To proceed with his plan, he constructed the early designs for the Everstick, and gathered members for his team. However, conditions were not that great in the beginning, and in 2017, a series of incidents eventually led to a temporary halt in business for the team. However, by participating in the “2017 K-Startup Challenge,” as well as the “Indiegogo” crowdfunding program, the team members could once again kickstart their business. In the same year, they were accepted for the “Youth Startup Academy” program operated by a branch of the Korean government and came to this point in 2018 with high hopes for the KITAS exhibition.

 

200+ Experiments for the Perfect Product

The all-in-one filmmaker, the Everstick, is light but not “light” in regards to the tasks it can accomplish. By conducting over 200 refined experiments, and storing information with the Everstick prototype, Infinite Neoism came up with a final version of the Everstick which integrated all the functions of Steadicam, tripod and monopod. Measuring 1ft in length, and weighing 600g, it is truly small and light. It can be carried inside your backpack when folded, but it stands 1m in length when fully extended. Moreover, it can perform the tasks of the following three products: a monopod, a tripod, and a Steadicam.

 

Everstick > Steadicam + Tripod + Monopod

The Everstick, however, aimed for greater. Via the synergy effects of the functions, the Everstick could enhance the performance levels of each. Now the tripod acts as the weight of the Steadicam, and the handle of the monopod. Likewise, the monopod acts as the main pillar for the tripod and the Steadicam. This enhances the balance of the Steadicam, stability of the tripod, and portability of the entire product, which eventually led to their “1+1+1>3” theory. It is an all-in-one filmmaker in a 1ft, 600g stick.

korean-electronics.com | Blog Magazine of korean electronics, brands and Goods

Filed Under: Cover Story Tagged With: , , ,

Car Jump Starter-cum-Second Battery & Blind Spot Cameras

July 4, 2018 by Leave a Comment

https://korean-electronics.com//inquiry

Car Jump Starter-cum-Second Battery (JUMPERKING EK2)

[INQ. NO. 1806E22] The domestic and overseas tuning markets have expanded gradually due to 25 million cars registered in Korea (statistics for 2015) and the significant increase in automobile consumption in overseas developing countries. In this context, customers’ demands of DIY and cost-effectiveness have increased in the field of car tuning supplies and safety goods/accessories. JUMPKING EK2 is the world’s first car jumper start-cum-second battery of micromini size capable of wired/wireless charging of smartphone, satisfying such desires on DIY and cost-effectiveness and helping solve unexpected problems. As JUMPERKING EK2 uses the safe polymer battery and has little memory effect, the self-discharge rate is very low. Therefore, after full charge, it takes about one year before the battery of the product is completely discharged, when not in use.


Previously, the car jump starter was very crude in design and too big to carry, so it had to be left in the car. EXCOSMIC took on the challenge of making a car jump starter available in everyday situation as well as in emergencies. We put function and design foremost, such as making a product of the world’s smallest size, improving the feel of grip like a smartphone and devoting ourselves to protection of appearance by using the special coating method. JUMPERKING EK2, sold in the domestic market as well as exported to the global market, competes with quality and competitiveness as a product MADE IN KOREA.
The functional strengths of JUPERKING EK2 are that it can help a car self-start within 30 seconds as well as recharge a discharged smartphone by cable or wirelessly on the move anytime and anywhere. JUMPERKING EK2 is a portable second batterycum- car jump starter optimized for the current trend where everything is changing every moment and multi-functionality is the mainstream.

 

Main functions of JUMPERKING EK2 are as follows:

The weight of JUMPERKING EK2 is only 200 grams, with a size smaller than a smartphone. Its voltage is 12V and an be only used in a car. It can help either a gasoline-powered or diesel-powered car self-start. It also can recharge a discharged smartphone either by cable or wirelessly, otherwise simultaneously. As an additional functionality, this product has mounted a three-stage LED flashlight that can be used for sending distress signal or shining warning light in case of emergency.

 

Blind Spot Cameras (EXVIEW Blind Spot Camera)

At the COEX exhibition held in mid-July 2017, the EXVIEW Blind Spot Cameras considerably surprised visitors by introducing itself with the slogan of ‘Is your blind spot safe?’
Camera experts were surprised at the performance of this small camera and were also amazed by its remarkable costeffectiveness. It was thus no wonder that they were so surprised as one product consisted of a subminiature camera having the functions of 120-degree wide angle and IP67 ~ 68 rating of waterproof and dustproof along with a 4.3-inch monitor of 400,000 pixels. It was no exaggeration to say that almost all of the visitors asked, “The price is that of one camera, right?”
It is said that 30 percent of traffic accidents are caused by blind spots. By developing the EXVIEW Blind Spot Camera which can solve blind spots while driving, EXCOSMIC has eliminated all the factors that could increase cost. Our development was focused not on the method of confirmation after the traffic accident but on the purpose of preventing accidents. Based on the principle of “It will be all right if we can see the side mirror without any internal or external interference,’ which was linked to our motto of ‘Let’s make it possible to be self-installed,’ we came to adopt the method that any object is visible if only anyone connects the power line to the USB terminal.
Adopting the DC 5V (USB) power supply system, this product can be installed very simply within five minutesand it is turned on/off when you start the car. Anyone might have experienced the dread of the blind spot at least once. You can drive safely if you install the camera facing the direction where you want to solve blind spots and check the blind spot with the indoor monitor while driving.


This product can be used in various places for diverse purposes, such as office, camping site, leisure activities, as well as blind spots. You only need to have a PC or notebook computer with power of 5V as well as the most common second battery, and you can use it anywhere. Now you can enjoy safe driving with the best cost-effective EXVIEW Blind Spot Cameras.

 

EXCOSMIC Co., Ltd., incorporated in 2010 as a software developer, prepared to enter the global market with manufacturing and trading of car-related accessories for the two years of 2014 and 2015. We launched JUMPERKING, a new concept brand product that can help a car self-start when the car battery is discharged. We focused on export of the product to many countries including Saudi Arabia, African countries, Hong Kong and Japan in 2016.
EXCOSMIC localized its development system in late 2016, produced and launched the version 2.0 of JUMPERKING EK2 in Korea in July 2017, and achieved various domestic and foreign licenses and patents. For the past three years, we have continuously focused on the promotion of our brand while participating in car/distribution-related exhibitions held in both Korea and foreign countries including Vietnam, Hong Kong and Japan. We participated in Hong Kong Electronic Fair (Spring Edition) held in April 2018 and plan to participate in KITAS 2018 and Seoul Auto Salon 2018 to be held in COEX, Seoul, this July.

korean-electronics.com | Blog Magazine of korean electronics, brands and Goods

Filed Under: Cover Story Tagged With: ,

Charging Product

July 4, 2018 by Leave a Comment

https://korean-electronics.com//inquiry

15W FAST WIRELESS CHARGING PAD

[INQ. NO. 1806E21] The Freedy 15W fast wireless charging pad is a fast charger, allowing users to charge up their phone faster than a regular charger. The standard charger provides an output of 5W, whereas it has an output of 15W.
Wireless chargers are definitely a convenience, as you can just place the phone on the pad and let it charge. The Freedy 15W fast wireless charging pad works with any Qi-supporting devices including new iPhone 8/8plus/X and Samsung’s fast wireless charging-supporting smartphones. It is currently available in White color only and includes an AC/DC adaptor.

 

Freedy 80W USB-PD MULTI ADAPTOR

The Freedy 80W USB-PD multi adaptor can charge any Cell Phones, Tablets and Apple MacBook using USB-PD standard fast. It is the highest spec. power adaptor available in the market. Especially, iPhone 8/8+/X and iPad Pro can be charged 2 to 3 times Faster by Connecting to USB-C PD Port of the product. It has 80W PD(1 port) + Quick Charge 3.0(4 Ports) and it is faster charging than existing QC 2.0. Also, it has acquired international safety certifications, including CE, FCC and RoHS.

 

KMT System launched its brand “Freedy” in 2013 based on mobile communication and antenna technology of its parent company, “KOMATECH.” We have been one of the primary suppliers of antennas for mobile phones for LG Electronics in Korea for over 16 years. Now, We are ramping up its technological competence in wireless charging in the transmitter and receiver areas with these products. Eventaully, Freedy has been growing as the No. 1 wireless charging product brand in Korea and is now expanding into various mobile accessory items and selling in both the domestic and overseas markets.

 

korean-electronics.com | Blog Magazine of korean electronics, brands and Goods

Filed Under: Cover Story Tagged With: , ,

Air Purifie

July 4, 2018 by Leave a Comment

https://korean-electronics.com//inquiry[INQ. NO. 1806E05] UNIX Electronics recently announced the launch of its first air purifier. This new product reduces PM 2.5 harmful substances like formaldehyde and ultrafine dust of 0.1μm up to 99% and 99.7% respectively through a quadruple filter. Cleaning Air Delivery Rate (CADR) and usable area are 407m3/h and 44.1m2, respectively.
UNIX Electronics has also applied the BLDC motor technology used in hair dryers to an air purifier. Considering the environment of using the product around the clock, it has adopted a lowvibration, low-noise BLDC motor.
Equipped with a high-precision smart sensor on its surface, this product features a “smart automatic clean mode” that operates by choosing the clean mode itself depending on changes in the surrounding air. As the air state is displayed in four colors on the front side of the main body, you can check the air quality at a glance. It is a slim tower type in white color, and it is priced at around KRW170,000.


korean-electronics.com | Blog Magazine of korean electronics, brands and Goods

Filed Under: New & Hot Tagged With: , , , , ,

Wireless Video Transceivers

June 28, 2018 by Leave a Comment

https://korean-electronics.com//inquiry[INQ. NO. 1806E20] WiseJet Inc. is specialized for wireless video solutions with 60GHz RF technology.
The company was established in 2015 based on a core technology transfer from the Korea Advanced Institute of Science and Technology (KAIST), and recently released its first product V-JET, which is the first 60GHz wireless HDMI transceiver in Korea.
WiseJet has exhibited its products at many domestic and foreign fairs such as CES, MWC, Japan IT Week to introduce its leading-edge technology worldwide.
WiseJet’s V-JET10 & 30 are wireless video transceivers based on 60GHz RF technology for wireless connection for any HDMI devices such as PC, console, TV, set-top box, etc. V-JET transmits uncompressed FHD (1080P) video data up to 30 meters (100 feet) with zero latency (less than 1ms), and it works as a plug & play device without any setup or S/W installation.
With the two wireless video transceivers, users can enjoy games, movies, YouTube, photos on their laptops and smart devices on the big screen without wire. By applying them, users can get rid of the space restriction caused by wires, and do presentations and video conference wirelessly. Thus, they can create smart work spaces for users.
V-JET prevents health side-effects of smart devices such as turtle neck syndrome or deteriorating eyesight by mirroring its display to the big screen. The support of plug&play function allows anyone to enjoy V-JET at a glance.
V-JET is a portable type of V-Jet and is specially designed for the newest devices with Type-C USB connector such as Samsung Galaxy S8/S9, Apple MacBook, etc. V-JETa is much smaller than V-JET and supports UHD (4K) resolution. V-JETa transmits up to 10meters (30 feet) and gets powered by the source device through Type-C USB cable.
V-JET 4K is a portable type of V-Jet, specially designed for the newest devices with Type-C USB connector such as Samsung Galaxy S8/S9, Apple MacBook, etc. V-JETa is much smaller than V-JET and supports UHD (4K) resolution. V-JETa transmits up to 10 meters (about 30 feet) and is powered by the source device through Type-C USB cable.

korean-electronics.com | Blog Magazine of korean electronics, brands and Goods

Filed Under: Cover Story Tagged With: , ,

Super Boom of Multilayer Ceramic Capacitor (MLCC) is Continuing

June 28, 2018 by Leave a Comment

https://korean-electronics.com//inquirySuper boom of MLCC makes major companies feel happy. Earnings and share prices continue their rising streak. The prospects for future demand are also bright due to price increases continued from last year. The industry expects the MLCC boom will continue at least until 2020.
According to the recent analysis of the securities industry, the operating profit consensus of Samsung Electro-Mechanics is expected be KRW746.3 billion this year, considerably surpassing KRW464 billion of year 2013 which was the biggest of all time. Samsung has already recorded the earnings surprise with its first-quarter sales of KRW2,018.8 billion and operating profit of KRW154 billion, increased by 28.5% and 503.0% respectively, compared with the same period of the previous year. Samsung Electro- Mechanics is No. 2 in the global MLCC market following Murata of Japan.
Samhwa Capacitor Co., Ltd. is also expected to experience its earnings surprise in the first quarter. Last quarter, sales were KRW52.2 billion and operating profit was KRW11.7 billion, increased by 18% and 171.3% respectively, compared with the previous year, thereby being expected to record an all-time high.
Daejoo Electronic Materials, which exclusively supplies the electrode paste for MLCC to Samsung Electro-Mechanics, is expected to recover sales of KRW100 billion this year. Daejoo Electronic Materials exclusively supplies copper paste, a core material used for forming the external electrode of MLCC, to Samsung Electro-Mechanics. This year, they expect sales of KRW30 billion in the MLCC conductive materials business only by adding sales of additives.
Cosmo AM&T Co., Ltd., which produces release films for MLCC, is forecast to renew its record-high earnings this year. As the demand of release film used in MLCC production increases in proportionto MLCC, its market outlook is bright. Cosmo AM&T Co., Ltd. recently expanded the production line for release film, thereby expanding its production capacity from 25 million m2 to 40 million m2 per month. The securities market expects sales of release films of about KRW 100 billion won this year, nearly 50% higher than last year.


MLCC, called “the rice of the electronics industry,” is an essential general-purpose product that allows electronic products to operate normally by storing electricity and then transmitting as much current as necessary. The number of MLCCs in a single smartphone is as many as 800 to 1000. As the era of electric cars and autonomous vehicles opens, the number of MLCCs required in a car is expected to reach 12,000 to 15,000. The unit price of MLCC for electric field is four times as high as that for IT. The upward movement in price continues as demand is rapidly increasing while supply is limited.
Dong-won Kim, a KE Securities researcher, explains, “The recent MLCC industry is very similar to the DRAM market, where oligopoly supply systems and new demand are expanded into the electronics field, resulting in the continuous price rise. The global MLCC market is expected to grow rapidly from KRW8 trillion this year to KRW14 trillion, grown by 75%, in three years.

korean-electronics.com | Blog Magazine of korean electronics, brands and Goods

Filed Under: Industry trends Tagged With: , ,

Far-Infrared Medical Superheater

June 28, 2018 by Leave a Comment

https://korean-electronics.com//inquiry[INQ. NO. 1806E29] Myungshin Medical Co., Ltd has developed the dome-type far-infrared ray medical heating device with effi ciency and convenience using the patent technology of the plate-type heating element and is now mass producing and selling the product.
Myungshin Medical’s far-infrared medical superheater is an item that can grasp both health and beauty thanks to its fat reducing effects, blood circulation acceleration effect, and pain relieving effect. It is free from radiation endangerment by using carbon-based heating element.
It is an effective alternative substitution for accident sequela, stomach pains, joint pain, neuralgia, and other senile diseases. It is a device that will substitute drugs or lower your dependence. Currently, it is being used as a substitutional curer for cancer patients at the Seoul National University Hospital’s Cancer Treatment Center, Cha Hospital, Chinese medicine clinics, and other general hospitals in Korea, Japan, and Europe.
Zen Beam of streamline with its loud two-tone color symbolizes youth, health and beautiful body line. Far-infrared rays, as warm as the sunlight, boost blood circulation in the body and reduce body fat and waste matter, helping you keep the clear skin and shape up.
If the pain persists for a long time or the stimulus is too severe, your daily life could become stressful. As Zen Beam (a far-infrared ray medical heating device) is effective for various kinds of pain requiring the thermotherapy (backache, arthralgia, stomachache, etc.), it can be widely used for various diseases.
Sun Beam Capsule, an emitter of Nano carbon material, emits a far-infrared ray wavelength of 4~16um, boosting the metabolism and reducing visceral fat. It is expected that the percutaneous infrared-ray hyperthermia will be used for obese patients, especially for patients having accumulated a lot of visceral fat.
Since its establishment in 1999, Myungshin Medical has grown as Korea’s best enterprise in accomplishments as well as in name. As of 2015, the company successfully accomplished the one and only obesity treatment clinical trial in Korea and completed registration with the U.S. Food and Drug Administration (FDA). The eff ectiveness and technology of its product has been recognized in such countries as the UK, Belgium, Sweden, Hong Kong, Australia, the USA, etc. and is exported to those countries. In 2015, Myungshin Medical strived for exporting the product to China.
Myungshin Medical will strive for continuous development of products by strengthening its world-leading technology, effectiveness, price competitiveness and ease of use. Myungshin Medical will advance as a more improved and innovative global enterprise as Korea’s proud medical leader, always considering customers’ health as a top priority.

korean-electronics.com | Blog Magazine of korean electronics, brands and Goods

Filed Under: Special Report Tagged With: , , , , , , , , , ,
«Previous Page
Next Page»